Three Intelligent Stages. Ten Technologies. One Seamless System.
Your water flows through a three-stage symphony of protection, with each stage meticulously designed to target specific threats. These filters work in perfect harmony, temporarily adjusting the pH to capture more contaminants before adjusting the pH back to its normal level.
No Electricity
No Salt
No Chemicals
No Service Contracts
No Wastewater
Low Cost
Small Footprint
High Flow Rate
Ultra Filtration
Stage 1
Contaminant Capture & Conditioning
Pure Way prepares your water for action, enhancing our effectiveness in removing contaminants right from this initial stage. Stage 1 utilizes media that temporarily lowers the water’s pH, boosting targeted contaminant capture by over 30%. This pre-conditioning setup not only improves the performance of subsequent stages, but also addresses sediment, metals, chemicals, and scaling minerals, establishing a solid foundation for what follows.
What Happens Here?
Your water flows through four powerful filtration media, each tailored for a specific purpose:
Scale Shield
- Salt-free scale prevention
- Converts hard minerals into microcrystals
- Prevents limescale without salt, electricity, or backflushing
Metal Shield
- Heavy metal and arsenic reduction
- Adsorbs toxic metals like lead, arsenic, copper, and phosphates
- Uses redox and surface bonding to neutralize threats
Chem Shield
- Chemical & VOC filtration
- Slightly lowering pH level to capture more contaminants
- Targets volatile organic compounds, pesticides, herbicides, and solvents
- Hybrid carbon/resin blend for deeper chemical removal
Particle Shield
- Microfiltration and sediment control
- Captures turbidity, rust, and particles down to sub-micron levels
- Protects plumbing and increases system lifespan
Stage 2
The Chemistry of Clean
Our advanced chemical filtration and pH balancing stage stands out from the rest. This is where the chemistry gets tactical. Stage 2 takes on the invisible, hard-to-remove stuff–from PFAS and chlorine byproducts to pharmaceuticals. It’s a powerhouse trio of reactive media that dismantles what most filters miss.
What Happens Here?
In this stage, your water hits three, high-performance media designed for chemical warfare at the molecular level:
ZVI
- Redox + adsorption powerhouse
- Combines zero-valent iron with catalytic carbon
- Destroys PFAS, chlorine, THMs, lead, and other heavy metals
pH Core
- pH conditioning + pharmaceutical capture
- Balances acidic water to neutral, protecting pipes and skin
- Traps hormone disruptors, pharmaceuticals, and hard-to-remove organics
- Proprietary open-pore structure for wide-range contaminant removal
Chlora-Guard
- High-speed chlorine neutralization
- Instantly reacts with chlorine and chloramine
- Works at high flow and high temperature (perfect for showers)
- Improves water taste and odor without chemicals or waiting
Stage 3
Where ‘Pure’ Hits ‘Peak Purity’
Our bio-barrier and final polishing. This is the final line of defense, and where our Pure Way great-tasting water shines through. Stage 3 uses medical-grade nanotech to stop the microscopic threats that other systems can’t, then finishes with a clean, crisp polish. It’s not just filtered, it’s redefined.
What Happens Here?
Your water flows through three advanced technologies designed to eliminate microscopic biological threats and leave nothing behind but purity:
Nano Armor
- Microscopic pathogen capture
- Uses electropositive nanofibers to attract and trap viruses, bacteria, and cysts
- Mechanical + electrical charge = unmatched sub-micron protection
- Medical-grade defense that works without slowing down your flow
Agion Silver
- Built-in biofilm suppression
- Ionized silver embedded into filter material
- Naturally prevents microbial growth and biofilm
- Keeps the inside of your system clean and hygenic
Nano Carbon
- Final taste, odor, and chemical polish
- Magnesium-enriched carbon for enhanced chemical adsorption
- Removes trace VOCs, off-flavors, and lingering toxins
- Leaves your water smooth, crisp, and refreshing
Impressed? Yeah, we worked hard for that.
Frequently Asked Questions
What contaminants did Pure Way submit for third-party testing?
Heavy metals (lead, arsenic, cadmium, mercury, chromium-6, etc.), disinfectant by-products (THMs & HAAs), PFAS “forever chemicals,” volatile organic compounds, common pesticides, and microbial surrogates.
How strong were the results?
Independent AM Test data shows 99.99% removal of lead, arsenic, THMs, HAAs, and multiple pesticides and >99% reduction of PFAS. Full tables are available in the downloadable reports.
What does “ND” mean in the RESULT column?
ND = Non-Detect. The lab’s instruments could not detect even a trace above their detection limit—effectively zero in real-world terms.
At what flow rate were the tests run?
6 gallons per minute; roughly two showers running at once, so performance reflects real household demand, not a trickle test.
Who signed off on these numbers?
AM Test Laboratories is ISO-17025 accredited and follows EPA Method 200.7, 300.0, and 524.2 protocols. Every report includes the analyst’s signature and chain-of-custody record.
How often do you repeat third-party testing?
We re-validate annually and any time we tweak materials, ensuring the data you see is always current.
Will my results match the lab exactly?
Removal rates can vary with local water chemistry, but the lab proof shows the system’s capacity to handle contaminant spikes far above typical municipal levels.
Real-World Performance You Can Trust
Independent Lab Validation
All three stages of our Next-Gen system undergo rigorous performance testing at AmTest Labs using EPA-approved methods:
- EPA Method 200.7 (Metal analysis)
- EPA Method 524.2 (Volatile organics)
- EPA Method 300.0 (Inorganic anions)
AmTest Report # 25–A012C718, June 26-2025
Lab: AmTest Labs
(EPA-certified methods 200.7, 524.2, 300.0)
- Arsenic: (99.99%)
- Chromium: (99.9%)
- Copper: (99.9%)
- Lead: (99.99%)
- Mercury: (99.99%)
- Haloacetic Acid HAAs: (99.99%)
– Dichloroacetic, Trichloroacetic, Monochloroacetic, Dibromoacetic. - Total Trihalomethanes Total THMs: (>99.99%)
– Chloroform, Bromoform, Bromodichloromethane - Volatile Organic Compounds VOCs & SOCs: (>99.99%)
– SOC-Pestacides,Insecticides, Herbicides, Organochlorines, Phenoxyherbicides, Glyphosate
Tested and Trusted.
Pure Way systems are built using select components that are tested by independent, recognized labs to NSF/ANSI specifications and certified by those independent labs to meet or exceed NSF/ANSI Standards 42, 51, 60, 61 and/or 372.
Our filtration media is sourced from industry-leading suppliers who have independently tested their components to meet or exceed the following NSF/ANSI standards.
Components Tested To Meet or Exceed NSF/ANSI Standards
- NSF/ANSI Standard 42 (NSF & WQA)
- NSF/ANSI Standard 51 (NSF)
- NSF/ANSI Standard 60 (NSF & WQA)
- NSF/ANSI Standard 61 (WQA)
- NSF/ANSI Standard 372 (NSF & WQA)
NOTE: These certifications apply to the individual filtration elements Pure Way uses within its whole house filtration system, not to the system as a whole. While our complete system is not NSF-certified as a single unit, we carefully source each internal component from industry-recognized suppliers whose materials are held to the highest standards for contaminant reduction, structural integrity, and drinking water safety.
